Новости

How to sew children's dispensers and sliders: patterns, sewing instructions, photos, video

Each parent wants to wear his child in beautiful and bright clothes. If you do not have the opportunity to buy new diapers and disasters, they can be sewn independently at home.

For details on how to sew children's dispensers and sliders will be told in this article.

How to sew a children's pile: patterns, sewing instructions, photos, video

Fabric for tailoring

  • If most adults can wear synthetic fabrics, without any discomfort, then kids need quality materials. Children's clothing manufacturers prefer Cotton flannel or Sitz.
  • The main thing is the material must be 100% natural. When buying fabrics, you should clarify the seller the quality certificate.
  • Dispensers need to sew from high-quality white fabrics. This is due to the fact that they are not pre-coated with dyes that can cause allergies in the child.
Sewing spraas
Sewing spraas

In addition to cotton, sitz and flannel, you can use such materials for sewing sprinkles:

  • Madapolam
  • batiste
  • Paper

Building patterns of sprawers

  • Now we will tell about how to sew a spray with the smell that will be fixed button or buttons.
  • After you decide on the material (be sure to take into account seasonality), you can transfer the pattern to the fabric. Picture option that you like can be found on the Internet completely free.
  • If the pattern is designed for children by age 2-3 months, and your child is a little older, then you can increase the molds before the size that is necessary.
  • First, decide on long clothes. Measure the distance from the shoulder to the thighs.

Width is ½ chest coverage. So that the dispenser was not tight, you can add a few centimeters to the width of clothes. So your child will feel comfortable, because the spread will not fade his movement.

Step-by-step instruction patterns:

Start
Start
Description
Description

Sewing spraas

Step-by-step instructions for sewing sprawers:

  1. When the patterns are transferred to the fabric, all the details need to be cut.
  2. Watch the vertical sleeve cut.
  3. Chest shirts stick to the shelf with a pin.
  4. Connect all the items, and wash them.
  5. Purge the lower part of the sprawling and the neck.
  6. To keep the shelves, they are fixed and buttons. The hinges in which the buttons will be inserted, you need to spend.
Stitching of sprawers
Stitching of sprawers

The length of the sleeve

  • It is important to determine the correct length of the sleeve so that the child is convenient. If you are going to sew a short skewer, it will be enough 7 cm.
  • If you are planned with scratches with scratches, then a total of 4-5 cm should be added to the total length of the sleeve. This will allow to protect the baby from injuries received from the marigolds.

Video: Instructions for sewing for newborn and older kids

How to sew your own children's sliders: patterns, instructions for sewing, photo, video

  • One of the most common clothes for the kid are sliders. If you do not have sewing skills - do not be discouraged. The process will take a little time.
  • Do not necessarily buy a sewing machine. All seams can be done using the usual thread and needles.

Varieties of children's polzunkov

There are different models of children's sliders. You have the right to choose the option that will look perfectly on the child, and will not deliver to him discomfort.

Most popular models:

  • Classic. They reach the belt;
  • Sliders in the form of a jumpsuit;

Also created products with decorations that can be with socks on the legs or with rubber bands on the ankles. Such a model can reach the waist or to the armpits. Also holding the sliders can with the help of rubberry or straps. A distinctive feature is the location of the seams that can be from the inner or outdoor side.

Fabric selection

  • Considering that the sliders will come into contact with the skin of the child, it is necessary to accommodively approach the choice of material. It is best to use Natural cotton T. K. It does not provoke allergic reactions, and allows the skin to breathe. That is, the toddler will not form the Padder - red spots on the skin, which deliver discomfort, and itch.
  • To the touch fabric should be pleasant. Choose materials Natural gentle shades . If the fabric is too bright, it means that dyes that can be dangerous for the baby were used. Note the preference of the stretching fabric so that the movement of the child was not compounded. You can sew the sliders from Flannel or Mahra.
Choose high-quality and natural fabric
Choose high-quality and natural fabric

How to remove measurements to sew the sliders?

  • Before proceeding with the pattern, you need to measure The length of the pants, the width of the legs and the length of the foot.
  • If you are planning to sew the sliders in the form overalls , then pre-measure height Child.
  • It is important to know the distance from the feet to the armpit and from Foot to the shoulder . It is necessary that the sliders correspond to the child's age. They should not be big on it or small.

How to sew a slider from a t-shirt?

If there is a T-shirt or a shirt in your wardrobe, which you will not be worn, it can be used to sewing children's sliders.

Prepare such materials:

  • T-shirt or T-shirt from which the product will be sewn.
  • Threads that are suitable for color. There should be no contrast.
  • Scissors.
  • The sliders that correspond to your child's age.
  • Sewing machine.

The sewing process will take no more than half an hour. If you have enough free time, you can make several models.

Step-by-step procedure:

  • Enter the existing sliders on the T-shirt. Before this, T-shirt must be turned out.
  • Circle the product with a pencil or handle.
  • Cut extra material.
Cut up too much
Cut up too much
  • Extend the back of the sliders for several centimeters so that the foot of the child climbs.
  • Enter, and round the cut of the weeding part.
Make rounded
Make rounded
  • Align the sock cut on the front and rear of the slider.
  • Form the fold. The distance from the sock to the fold should be peeling the length of the feet of the child. Stretch the seams.
We combine and make a fold
We combine and make a fold
  • Side the bending, located on the upper edge of the side seam.
  • Cut all the threads and endure the product.
Cutting everything too much
Cutting everything too much
Insert rubber band
Insert rubber band
  • You can wear a slider on a child.

How to sew a classic sliders?

If you want to sew a classic sliders, stick to such instructions:

  • Print the pattern you have chosen.
  • Transfer the pattern to the fabric, rubbing the edges with chalk.
  • Cut the blanks, making a stock in 1 cm.
Cut out
Cut out
  • Separately cut the socks. They will need to sew to the pant.
Stitching
Stitching
  • Connect the front and rear parts of the product, equalize sections, and wash the seams.
  • Fold the belt face inside, steps into the ring. Remove to seam formed inside.
Measures for belt
Measures for belt
  • Insert the gum into the belt and place the seam on the belt with the side seam.
  • Stop all the seams on the typewriter, reveal them.
  • Use the destination.

Video: The simplest model of the slider?

How to sew a romper overalls?

Such a model is made a little more difficult, but it turns out more interesting and warm.

It turns out such a combesis
It turns out such a combesis
Instruction that is convenient to save
Instruction that is convenient to save

How to decorate the sliders?

There are different ways to decorate children's sliders. You can use such tricks:

  • Sew bright pockets on which flowers or sun will be depicted.
  • Make beautiful and unique inscriptions. Often, the name of the child is embroidered on the sliders and dispensers.
  • Seach images from cartoons with interesting inscriptions.
  • Sew a beautiful and bright bow if clothes are sewn for a girl.
  • Make beautiful straps.
Create beautiful clothes
Create beautiful clothes

So, now you know how you can sew the sliders or disintegrations for children. As can be seen, it is not necessary to contact a specialist. If we are stocking of the necessary materials and free some time, you can contribute to the baby's wardrobe.

Video: How to sew the sliders with closed legs?

Video: How to sew the sliders on the straps?

Other articles about needlework on the site in which we will tell how to sew:

The appearance of the baby in the family is an important and exciting event. Young mothers with trembling and care are chosen for the future family member everything is necessary. First clothes, a crib, stroller - for mom it is important that the newborn has everything you need.

Of course, it is very nice to do something from the attached kid with your own hands. To make each mom to make something for your crumbs, below shows the master class and pattern of sprawers for the newborn.

Such a type of clothing is a shirt of a lap, very convenient in the first days and months of the baby. Firstly, it is very easy to wear on the baby, secondly, it is free, it does not constrain the movement and does not rub anywhere, the baby is comfortable in it. As the very first clothes for the crumbs, a children's sputum with closed handles is suitable. Also included with our blouse can be sewed with a hat or cape.

For your convenience, the table shows the exemplary values ​​of the size of the child's age, so that you can sew a sprinkle and larger size.

Pattern of fine decomposion

On the pattern above, a blouse is a blouse with a smell with fixation on the key or button, which we will sew.

To sew a dispenser for a newborn with your own hands, first decide on the type of fabric. For children's clothing, especially for such kids, the fabric must be soft and pleasant to the child's calf, because the baby's skin is very sensitive.

For thin summer sprawers, the sieve, a hawk, cotton knitwear fit well. For the winter period, it is better to choose a canvas warmer, for example, flannel or bike tissue. Coloring fabric Choose not too bright, so that the thing is not polished when washing.

After you have determined which option to sew a blouse, move the pattern on paper. The sorts of shirts listed on the patterns are suitable for a baby for up to 2-3 months, so just increase the pattern pattern to the desired size.

If you want to approach the process more creatively, you can independently build the pattern of sputums in a natural value, and the babes grow rapidly, and you can as the baby grows, sew new blouses to him.

To begin with, we define with a length of the dispenser - this is the distance from the shoulder of the child to the hips. The width is taken as half the circumference of the chest, and add another 5-8 cm that the blouse sat freely. After you have identified the first sizes, we will build a rectangle on paper AVD.

Side AB = Width / 2, Ad = Bluffle Length. From the point and laying 5 cm down (point E1) and to the right (point F) is the width and depth of the anterior neck. Connect these points with a smooth round line.

To build the neck of the neck on the back will retreat from the point and down 3 cm (point E). Also connect the points E and F curve of the line.

Down from the vertex in making a distance equal to 1/3 of half of the thoracic circumference (point C1) is the depth of the armhole. Next, carry the length of the sleeve.

Then, from the point to the right, along the line Av, we put our sleeve length and get a point B1. From B1 postponing the depth of the armor and get a point B2. From the point C1 down and to the right to postpone 4 cm and the angrily angle under the hand. We got half the back of the sprinkle for a newborn.

For the front part pattern from the top D, I will postpone the left distance of 1/2cd - we get a d1 point. After that, laying up a segment equal to the AD-3SM and get a d2 point. We connect all the resulting points D, D1, D2 and E1 and spin the corners D1 and D2.

For those who want to sew the scratches separately from shirt, it is recommended to download and print up the scratches proposed below.

Scratches are sewn very easily. The fabric can be used the same as for the sprinkle. Fold the selected material twice and transfer the pattern to the fabric.

Next, sew the items and insert a rubber.

We now turn directly to the sewing of the sprawers. Transfer the pattern patterns, as shown in the photos below. After that, cut out all the details.

We have one piece of an alcohol backrest, two shelves, 2 holes of the scratches and 1 clasp clasp.

When sewing the dispensers should consider that the seams need to be laid out, since the newborn thin sensitive skin and the seams can deliver to them discomfort. It is not necessary to sew on the typewriter, you can spend the details of the shirts manually.

To begin with, it is necessary to spend the vertical slice of the sleeves and the bottom of the scratch details. Then we apply the parts of the scratch to the shelf and rush the sewing pin.

Shirts of shirts rude to the shelf.

Next we fold all the details together and coach.

After that, it is necessary to spend the bottom of the shirt and the neck.

To make the shelves, you need to install buttons or buttons on the poles and the shelf. Buttons for buttons are also necessary to spend.

So, we got a sprawling with closed handles. The advantage of such a model that, if you wish the scratch, you can bend and release your kid's fingers.

The length of the sleeve

The proposed patterns are very universal. You can, if you wish, upgrade them, as you are comfortable. For example, if you want to make a shorter hood, then when building a pattern, the length of the sleeves take 7 cm.

If you sew the scratching option with scratches, put the allowance of 6cm from the total length of the sleeve. Options, how to sew a lot of disintegration, you can choose several models at once.

Fastening loops

Also fantasize with the option "fastener" of sprawers. This, of course, is a conditional concept on this form of clothing, but you can choose, for example, swing hinges - rusts. Then the blouse turns out by type of kimono.

The fastening of this type of loops will be not only outside the shelf, but also inside the side seam, as shown in the photo.

How to sew a decay for a newborn: video MK

How to sew a mash simple pattern

Surely, you will want to make not one model of sprawers, go to your pleasure!

The following are several options for the cuts of shirts for newborns. You just need to download them and fit under the desired size. Thus, your baby will have a unique diverse wardrobe created with care and love.

Short sleeve blouse

Spaschonka-Kimono.

Blouse-dispenser for newborns: Detailed video MK

Spasching for newborns with your own hands with patterns: What pick up fabric, patterns for kids from 0 to 3 months, sequence sequence, video with master classes for beginners

Each mom wants her newborn baby to look flawlessly. Today it is a huge assortment of baby clothes, but quality and their cost does not always correspond to the desired. Therefore, we present a detailed description of the sewing process with your own hands in a step-by-step selection with patterns of original and warm sprawers for newborns. Sometimes it is the only option to create comfortable conditions for the baby.

We sew a warm sprawset for newborns with your own hands with patterns

Not depending on the method of manufacturing clothes for a newborn (crochet, knitting, knitting or sewing from the fabric), you need to consider the composition of the threads.

Of course, nothing will replace according to any parameters of cotton flannel or sitherium (with a cotton content of 100%), which are an ideal cloth for tailoring newborns.

As a rule, future parents acquire a fabric for diapers in advance, and sprawers can be sewed from the residues.

Conclusion, baby clothes need to sew from soft tissue (sitheria, flannel, batista, paper, madapolam), try to get higher quality fabrics to eliminate the possibility of irritation on the baby's body. Choose fabrics having a smaller color, as dyes are dangerous for the kid.

Pattern patterns for kids from two months is presented in the photo below:

Used measurements:

  • The length of the product is 30 cm;
  • semi-cudding neck - 12 cm;
  • Semi-chest breast - 24 cm.

If smashes are needed smaller or larger, then use the source formulas below:

  • In accordance with the long sprinkle - 30 cm, draw the AVSD rectangle with the vertical lines of hell and sun. Then the lines of AB and CD will be width - 14 cm. This value includes 1/2 part of the semi-coupling of the chest with the addition of two centimeters for free felting (24: 2 + 2 = 14 cm).
  • Cut the neck of the back: from t. In the left of the line AV measuring 4 cm (1/3 of the neck of the neck), then from t. In down the line of the aircraft, measure 1 cm (for all sizes) and connect the two points with a slight concave line.
  • Cut the neck from the front: from t. In down along the line of the aircraft, measure 5 cm (1/3 of the semicircle of the neck + 1 cm).
  • Sleeve Length: From T. And I spend left over the line AB 10-15 cm and mark the point R. Then we measure the length of the hand of the baby and look forward to the value if you want a closed sleeve, then add 4-5 cm. It is better to make a spacious sleeve to not Standing the movement of the newborn.
  • Sleeve width: From T. P We carry a line down parallel to the hell line, until it is 11 cm. From the obtained point 11, swipe the horizontal line to the intersection with the HD line and put the P1 point.
  • Bottom sleeves: From point 11, we measure 1 cm along the line connecting points P and 11. From T. P1, I refer to the left 2 cm along the line connecting points P1 and 11. From the point P1 downstream, we deposit 3 cm (point 3) . We get the bottom of the sleeve by spending a line through the three points obtained.
  • Side seam: from t. D We lead to the left along the line of the CD and lay 2 cm (point 2). Connect this point with a point 3.
  • Long products: We divide the line of the SD on the smooth two parts and mark the point, then from point 2 upwards along the side seam meter 1 cm, then connect two points.

Recent Actions - Determination of the species and depth of smell, as well as what will be the fastener, you can select yourself, as it is not necessary to paint the smell, it is done immediately on the fabric.

We study the pattern of dispensers for newborns 0-2 months

Pattern patterns for newborns from 0 to two months is presented in the photo below:

This product is cut out without drinks on the seams, since they all go on the front side.

To sew such a sprinkler: Approximately 26 cm Citz width 150 cm (you can sew four dispensers), for decoration - 40 cm in white color, threads under the color of the product, disappearing marker, scissors, pins, overlog.

The details of the decarkum cut are painted in the photo below:

Sequence of work:

  • The original facility is twice and put the part of the pattern on the share thread.
  • We supply the contour on the front side using the disappearing marker.
  • We cut the elements of the product without allowances on the seams, and in the center of the front side, fasten, with the help of a pin, strips of our.
  • We are applied in the center. Then we fold the front elements with the back of the shoulder seams and steal them overweight.
  • With the help of an overlog, we process the lower slice of the sleeve, we process both smells on the back and the total cutting of the neck, the lower cuts of the face and the back. Then we fold the sprinkle on the side seams and stead them and the sutures of the sleeves continuously.
  • At the last stage, turn the product with the steamer. Spaschonka ready!

Video on the topic

For a more visible presentation of the process of making sputum for a newborn, we offer you to get acquainted with the video master classes for beginners:

For the smallest! We sew a dispenser for a newborn

Pattening patch for a newborn

Spaschonka - it is the clothes that the newborn baby gets from the first days of life. And since during this period, the child's skin is especially gentle and heat exchange is not adjacent, approaching the selection of fabrics for the breakdown is especially demanding.

For the warm season to sew sprawers better than their Citz, Bosi, cotton trample knitwear. For winter time, flannel, bike tissue suitable. It is important that the fabrics are soft and not rubbed the skin of the child. For breakfasts, you should not choose fabrics with bright dyes, they are easily dried, leaving traces on the skin. It is better to stop your choice on the tissues of light tones, with a delicate pattern.

Pattern of sprawers

Fig. Fabrics for dispensers

Suts on dispensers for newborns are performed outside. This prevents rubbing and presses the child's skin. Sleeves can be open and closed - with mittens or as they are also called "anti-zarants". This is especially convenient aged 0.5 to 2.5 months, when the baby is especially actively moving with handles and may accidentally scratch the face.

For newborn, the sprawers are traditionally sewn without ties with the smell on the back, since children are preferably lying on the back, so sprawers are used, sprinkled from behind. Front convenient to wear and remove the burst.

Sizes of dispensers

Dispensers, as a rule, are sewn in two sizes - 50-56 (from birth to 2 months) and 62-68 (from 2 to 6 months), but for this age, mostly moms are already moving to Bluffs, sliders and body.

Table standards for newborns

Sizes of dispensers

Table standards for newborns

We suggest you independently sew a sprawling along our pattern. You will make sure how it is quick and easy to do. Especially, sewing is profitable! - Since the cost of finished products is now very high, and from one length of the fabric needed for pamphinks, you can sew the whole four sprawers!

Pattern of sprawers

In order for you to independently build a sprinkler of the desired size, use the standards from the table. Our pattern of sprawers is given to size from 0 to 2 months.

Pattern of sprawers

Fig. 1. Pattern of dispensers

Build the pattern of dispensers as shown in Fig. 1. The sputum lies without drinks on the seams. All seams are performed on the front side.

For dispensers you will need: About 0.26 m sitz fabric width 145 cm (from it you can sew 4 disintegrations!), 0.4 m are styled white for decoration, threads in tone.

Details of the decarkum cut are shown in Fig. 2.

Pattern of sprawers

Fig. 2. DETAILS CROWING SPORTS

How to sew a dispenser - master class

Enter the details of the pattern on the share thread on a folded halve cloth.

Pattern of sprawers

Fig. 1. Details Patterns Spindlers

Circuit contours on the front side of the disappearing marker.

Pattern of sprawers

Fig. 2. layout layout for fabric

Pull the details of the dispensers without allowances on the seams.

Pattern of sprawers

Fig. 3. Circle without letters on the seams

In the center of the transfer point and stick the strips of the nonsense to decorate. You can do without them, but so the sputum will acquire an elegant look.

Pattern of sprawers

Fig. 4. To impose in the markup

Put in the center. Fold the details and backs on the shoulder seams.

Pattern of sprawers

Fig. 5. Put the progress

Still shoulder seams with flat overlocked seams outwards.

Pattern of sprawers

Fig. 6. Start the shoulder seams

Then, wash the lower cut of the lower cuts of the sleeves, by one seam, wash both odor on the back and cutout of the neck of the transfer and back, the lower sections of the transfer and backs. Then fold the sprinkle on the side seams and take the side seams and suture of the sleeves without interrupting the lines.

Pattern of sprawers

Fig. 7. Treat lower sleeve cuts

To the ends of the lines did not bloom, make the ends of the threads with a needle with a big ear.

Pattern of sprawers

Fig. 8. Fill the ends of the threads

Cut the ends of the threads.

Pattern of sprawers

Fig. 9. Ends of threads

Plug the sprinkler with an iron with a steamber. Spasching for your baby is ready! Let your child grow strong and healthy and pleases you day after day!

See also:

Modern children - from the very birth of fashionists: there are numerous bodies, men, blouses and even jeans for newborns on sale.

But what could be more pleasant to the clothes, asked my mother's hands? Today we will tell you how to sew a dispenser for a newborn. It is well suited for the first months of the child's life when he can scratch himself with sharp nails.

In addition, due to the soft and warm bike tissue, the baby will not freeze in such clothes.

Pattern of sprawers for a newborn in full size: how to sew

Materials and tools for tailoring :

  • Parchment (paper for baking)

Pattern of sprawers for a newborn in full size: how to sew

Sewing spraas for a newborn

To begin with we will need Pattern of sprawers . We will build it on parchment paper. For 62 sizes (most likely, the child will wear this breakup to 2 months) we make such measurements on paper:

  • Spindlength height - 26 cm
  • Height from the bottom edge to the front of the neck - 23 cm
  • Height from the lower edge to the sleeve - 14 cm
  • Swimming width - 27 cm
  • The width of the sleeve armpit - 12 cm
  • Swimming sprinkles with sleeves - 57 cm
  • The width of the sleeve with an indent 4 cm from its edge - 9 cm.

It turns out a variable, but we need to consider that we sew it from a fabric that is not stretched. In addition, children's clothing must be free, so such dimensions are for pamper - just right.

Pattern of sprawers for a newborn in full size: how to sew

Cut out the pattern of sprawers and tailoring pins fix it from the wrong side of the bike tissue. Crow fabric clearly on the pattern, without indents. We have the back of the product.

Pattern of sprawers for a newborn in full size: how to sew

In front of the sputum will be fastened on the buttons, so we will make it from two parts, which are slightly entering one for another.

To do this, we fold our pattern in half (across) and on top of the fibe line we fall at 1 cm.

We put a pencil there and from this point from hand draw a lower neck (after all it will be before steaming). Cut the neck and fix the pattern with pins to the involve of the bike.

Pattern of sprawers for a newborn in full size: how to sew

Now, by hand, you can draw an additional part on the fabric, thanks to which the half of the front of the sprawling will go to each other. From the central edge of the part, we retreat 2-3 cm - this width is quite enough. Do not forget to round the edges of this detail so that the future breaking will not give the baby anywhere.

Pattern of sprawers for a newborn in full size: how to sew

The same pattern we build for the second half of the front of the product. The only condition is this item must be built in mirror reflection. We cut both front halves of sprawers. Now we have all the details of the product: both back, and two front parts.

Pattern of sprawers for a newborn in full size: how to sew

Then we need to handle the edges of the details so that the fabric does not appear. We carry such parts with a loop joint: in the back - only the neck (provided that the lower line of the back is carved along the edge of the tissue), in the front parts - the neck and the side line turns into it.

Pattern of sprawers for a newborn in full size: how to sew

It was time for assembling a sprawset for a newborn. Internal seams We will not use, as children's clothing should not bring discomfort of the tender skin of the baby.

From outside, we sew all the details of the dispensers with a looping seam: sew the line that leads from the neck to the sleeve, the sleeve itself and the line from the armpit to the bottom of the product.

I repeat the same on the other hand, that is, with the second front part of the sprawling.

Pattern of sprawers for a newborn in full size: how to sew

As we already know, our blouse will be fastened on the buttons. For them we will make the appropriate holes. Buttons will be sewn to the right, it means that we will make holes on the left side of the sputum. Thin manicure scissors cut the hole near the edge of the front of the sprawling, which in size equals the size of the buttons.

Pattern of sprawers for a newborn in full size: how to sew

Then threads we carry a hole, making small stitches. It is necessary so that the fabric does not appear and the threads stick out of the hole.

  • The same is done by 5 cm below, forming a hole for the second buttons.

To the right side of the blouse, sew buttons in the mirroring places of the holes. If you wish, you can make a sprinkle on 3 or more buttons, as well as on other clasps - buttons or even velcro.

Baikovaya sprawling for a newborn baby is ready! We hope our detailed master class will help you sew it without much effort.

A source: https://active-mama.com/raspashonka-dlya-novorozhdennogo-master-klassnogo-poshivu.html.

Simple patterns for the newborn: Spasching, envelope, comforter do it yourself | Duet souls

Published BUEN. - January 5th, 2016

Pattern of sprawers for a newborn in full size: how to sewDo you like to roast? On our site we picked up the patterns for you for newborns!

Since many young mothers lack time, strength, finance and skills, To sew a complex product for newborns, That and patterns should be simple.

We suggest you sew an envelope, shocking, booties, whirl, comforter with your own hands. As well as a more complex product - dispenser (the pattern to each product is attached).

Envelope for a newborn with your own hands

A simple pattern at which you can sew an envelope for the summer or spring-autumn depending on the thickness of the insulation (syntheps). In addition, there will be two types of fabrics for indoor and outer sides and two zippers with a length of 50 cm.

Cut the details from the other fabric, and between them lay the syntheps. Lightning sewn in the process of stepping from parts among themselves. Here is the pattern and photo of the finished envelope:

Pattern of sprawers for a newborn in full size: how to sewPattern of sprawers for a newborn in full size: how to sew

Envelope-changer for a newborn

Pattern of sprawers for a newborn in full size: how to sew

  • Thus, you will need only two types of fabric and velcro.
  • Picture for infant size can be downloaded here.
  • Or take advantage of this scheme with a hood:

Pattern of sprawers for a newborn in full size: how to sew

Booties from felt

It is very easy to sew with your own hands for newborn patterns very beautiful and elegant booties from felt.

Pattern of sprawers for a newborn in full size: how to sew

Felt must be quite dense. You can decorate booties with butchers, embroidery, ribbons. Details are sewn by hand with a marking seam. (Download this pattern to open in kind)

Pattern of sprawers for a newborn in full size: how to sew

Comforter do it yourself for a newborn

The comforter is such a napkin-toy that Mom holds with him, and rewinding from the child, leaves him next to him in the crib.

Pattern of sprawers for a newborn in full size: how to sew

Sew such toy is very simple. You will need two types of fabric and threads to embroider nose and eyes. And also a bit of the filler for the head and foot.

Pattern of sprawers for a newborn in full size: how to sewPattern of sprawers for a newborn in full size: how to sew

Bar-slotman

There are two options for infants - on ties or on velcro, respectively patterns are different. The fabric must absorb well and easily stupid.

You can sew a whirl in a few layers, and from the wrong side, carve out the layer from the oil. The main thing is that the size fit in the neck area is not tight and not too free.

Pattening patch for a newborn

Swimming with your own hands sews elementally simple. You can even do without a pattern by taking ready-made sprawling for example. Our dispenser, the pattern of which is presented below, is intended for a newborn (up to 2-3 months) with scratches on horse-on (however, if you are not needed, you can not be cut out).

To begin with, the standard dimensions of the breakdown:

Age of the child Pickup length Width of dispensers The length of the sleeve Sleeve width
Up to 2 months 24. 28. 69
From 2 to 6 months 26. 32. 8ten
From 6 months to 1 year thirty 34. ten 14

And here is the pattern of dispensers:

The smell and scratches are highlighted on the details of the gear. Please note that the back is cut out with one detail - fold the cloth twice by placing fold as in the figure. Suts place outward, treat with overlock or zigzag. In detail how there should be dispensers for newborns here.

  1. We hope you will be useful to these patterns for newborns - with your own hands to sew kids is a pleasure!
  2. Interesting articles - what things newborn can be made with your own hands:
  3. Developing toys children with their own hands
  4. Pillow for feeding with your own hands
  5. Sew diapers themselves for newborns
  6. How to make a mobile on a crib with your own hands

A source: https://duetdush.ru/vykrojki-dlya-novorozhdennyh-svoimi-rukami/

How to sew a sprinkle for a newborn with your own hands

Women always relate to their little children. They indulge them and try to make them something with their own hands. Always want her crumb to wear, it is elegant, brightly, so that the clothes on the baby differ from the one that is sold in stores. Because moms and sew their kids comfortable things.

In particular, the usual sputum with antihafts or without, who stitched by the mother, will be better to sit on the child than shopping clothing. Loving mom will take into account the size, make a dispenser from such a material that will not irritate the skin. Woman's good energy particle will give newborn calmness, even if the crumb will dream of a terrible dream.

Pattern of sprawers for a newborn in full size: how to sew

How to sew a sprawset for a newborn with your own hands - the choice of fabric

Perhaps choose a fabric for a newborn to sew a sprinkler - this is the most important part of the work. You can not use the synthetics for clothing.

It is better than cotton fabric, nothing else is invented by science. For dispensers, such materials are well suited as Len, sitheria, flannel, etc.

Moreover, warm types of cotton fabric should be chosen in the cold season, and thin canvas are suitable for summer.

Pattern of sprawers for a newborn in full size: how to sewMaterial for tailoring

When you come to the store of fabrics, pay attention primarily on non-labor materials and on the quality of the canvas. If you chose natural cotton, then ask the seller, whether there is a conclusion of experts that matter is suitable for newborns, there are no harmful chemical components there.

Do not chase for cheap, pick safe materials. Cite with a grayish-white tint, as a rule, having small face with the front side, crumbly drawings on a white background, suitable for children best. After all, the paint does not penetrate into the material. The water side of the fabric is not painted. Because the tender skin of the crumb does not contact with paint in clothes with such a canvase.

Sitsery materials with a smooth-colored surface have a color with deep impregnation, and on top of it, manufacturers apply all sorts of patterns, drawings. This fabric is still better not to take.

Pattern of sprawers for a newborn in full size: how to sewSitz for breaking

IMPORTANT : For one breakout, it is enough to take only about thirty centimeters of the material, a small width. Also, it does not prevent in advance to think about how to smell will smear, buy for the button fasteners, buttons, etc.

How to sew a dispenser for a newborn with your own hands - Building pattern circuit

So, after the mattery is selected, you can proceed to the following procedure. Build a pattern of patterns, but take measurements before that. You will need to know:

  • Product length . Measure the kid from the high point of the shoulder to the ass. Suppose that it turned out 28 centimeters.
  • find out Semi-cuddly shaky The child will be about 12 centimeters.
  • Measure the baby in the chest area and divide the data into two - 24 centimeters, this value is called - Semi-chest breast .

Pattern of sprawers for a newborn in full size: how to sewScheme pattern with baby hat and antihafts

After that, you will easily make a scheme-pattern of sputum. For the process, take a sheet of paper and pencil with a ruler.

  1. Start drawing a sprinkle from a rectangle. Vertical postpone twenty-eight centimeters - the length of the product. Horizontal deposit 14 centimeters. This value is calculated as follows: Semi-cuddle breasts are divided into half and add 2 centimeters for free felting.
  2. When the rectangle is ready, make a neckline of the back of the rear of the sprawling. From the point to the left in the upper corner of the rectangle, set aside four centimeters. This magnitude is calculated as follows: the semi-cuddle of the neck is divided into three parts. 12/3 = 4 centimeters. After the top of the rectangle, it is necessary to postpone one centimeter. And draw a smooth line connecting these two points.
  3. Now draw the neckline cutout. Again, postpone five centimeters from the same point. The magnitude is calculated as follows: the semi-cuddle of the neck is divided by three, add one to the obtained zyfra. 12/3 + 1 = 5. Down from the top angle, set aside one centimeter and connect the smooth line of the point.
  4. Now it remains to draw the sleeves. The length of the sleeve is approximately 13-15 centimeters, so as not to guess themselves measure this magnitude and the width of the handle in the widest part of the handle.
  5. Set the length of the sleeve from the intended shoulder on the pattern. Down from the extreme point of the sleeve, set aside half the width of the sleeve plus 3-5 centimeters on the free felting. If there are antihafts, then you still draw them. But for this, add a few more centimeters in length and width so that the baby's handles were not closely.
  6. Bottles of the pushes should expand closer to the shoulder. It is desirable to arrange a smooth line.
  7. The sideways are done like this: at the bottom of the right angle of the rectangle, we put two centimeters and the straight line connect the right point of the top corner of the rectangle and the bottom obtained.
  8. The lower line of the sputum will be smooth. To draw it, you will need to postpone two centimeters up and spend a smooth line of Niza on the side cut.

Pattern of sprawers for a newborn in full size: how to sewDispensers for newborns

The pattern scheme is almost ready, it remains to decide how the dispenser will be played (behind, and maybe in front). What should be the width of the odor itself and the form. Someone loves rectangular forms, and someone is rounded. Hereby given it and draw it in the scheme.

How to sew a pile for baby with your own hands - step-by-step process

The resulting pattern scheme - is only the fourth part of the product. Therefore, do not confirm when you cover the front part of the sprawling and the back.

  • If the smell is in front, then you will need two parts of the transfer and one part of the back. At first, on the fabric, reveal two details of the transition, only the pattern is posted economically so as not to use a lot of material. And be sure to make the allowances for the seams. For cutting the backing material, fold twice so that there is no seam in the middle of the product. When you transferred all the details of the cut paper on the fabric, now you can cut them. And start the sewing of the sprawers.
  • The front parts of the product and the back will fold to each other. And the seuthes of seams overlock. If not, the typewriters, then make a positive seam manually, and for beauty you can choose bright threads of different colors.

Pattern of sprawers for a newborn in full size: how to sewFlannel Pickup for Baby

  • Try not to pull a lot of threads when you sewing spraas, do neat, even lines, because they will be in sight. On the machine you can use a zigzag for sewing sprinkle, but the seams made by hand more beautifully and softer.
  • All these seams make on the face so that they do not rub the gentle baby's skin. Maybe not everyone likes, when the seam products have to come to humble - in the first place for kids comfort, not a beauty.
  • But so that it is beautiful, the bottom of the product, the neck, the edges of the smells can be buried with a crochet or flash with a special edge ribbon. Even for beauty, in front make embroidery or glue pictures. It remains to make fasteners and all the disintegration for the baby is ready.
  • As you can see, the pitch can be sewn and manually sew. And special skills, great experience in needlework for this not necessary. The main thing is to try and invest your love in the process. Then such thing will protect the child from adversity.

Examples of ready-made sprawers stitched with their own hands :

Pattern of sprawers for a newborn in full size: how to sewChildren's sputum warm of two types of materials Pattern of sprawers for a newborn in full size: how to sewGreen flannel sprinkle Pattern of sprawers for a newborn in full size: how to sewSpacers from Sitz

Video: How to sew a sprinkle?

A source

Helena Contemporary

  • Activity: 69K.
  • Gender: Woman

Helena Contemporary

A source: https://delaemrukami.org/1695004985785322000/kak-shit-raspashonku-dlya-novorozhdennogo-svoimi-rukami/

How to sew the sliders and dispensers for newborns: pattern with a description of sewing

Every future mother is waiting for his baby with impatience, dreaming about how she will wear it in the most different clothes. Only here in our reality clothes for newborns are quite expensive, especially if we are talking about high-quality caskets and sliders.

In our master class, we want to handwriters to help sew a suit for a newborn baby, which consists of a deposit and sliders.

Pattern of sprawers for a newborn in full size: how to sew

Here you will find patterns of sliders and sprinkle with the necessary dimensions and a complete description of each stage is built.

Spasching.

First we will tell about the dispenser, which is the necessary thing for each newborn. For inexperienced moms, we immediately note that for cuts such spills are sewn with the smell on the back, as the newborn children still do not know how to turn over. For babies, older are already comfortable, pile, which are fastened from the front to the button, or wear through the head.

As an option to use the smell in front, and the fastener can be placed not strictly in the center, and on the side. The most optimal zipper for children's clothes will be buttons, not buttons, since the latter have a habit of constantly unborn. A good option can be called a sprinkle with a clasp on the shoulder, which is convenient and unborn and unborn.

Even if you like to sew and you have a baby with a baby at this time, you do not need to put a lot of sprawers for one age, since the children are growing enough in the first year.

Another advice: Since the skin of the newborn baby is sufficient gentle, the first two or three months all the seams should be performed on the front side.

How to choose a convenient length for sprinkling you ask? To do this, measure the distance from the shoulder of the baby to his thighs, and so to get from the width of the product should be divided into the bombing circumference to two and add five to eight centimeters to free fickling. As a rule, if the baby is not more than two months, then the width of the sputum should be about 26 centimeters, and the length is 24 centimeters.

Now proceed to the lesson - how the pattern of dispensers for newborns is built. We start with a rectangle with the tops of the ABSD, whose party will be equal to half the width of the product, and hell is its length.

For the neck, it follows from the top and postpone in two directions of five centimeters, which will become a depth and width of the neck. The obtained points should be connected to the smooth line of the spindup gate - this is for the front of the product.

For the back, it is necessary to postpone three centimeters from the same vertex and also to spend the gate line for the rear of the sprawling.

Pattern of sprawers for a newborn in full size: how to sew

Next, the queue is for the past, for which one third part of the bustiness of the baby, plus, two centimeters should be postponed from the point in the point.

On the right side of the same vertices should be postponed the length of the sleeve that can be performed at your discretion. If the sputum for winter time, then the sleeve should be long, if for summer, then shorter.

As a result, we obtain the vertex B1, from which you should postpone the depth of the armor.

Do not forget to make a smooth rounding at hand, about four centimeters down and right. Thus, we got a pattern of the front of the sprawling.

For the back of the product or back from the top D to the left side, we lay a segment equal to half of the segment of the SD - the vertex D1. Then, from the resulting point, we lay a segment equal to hell minus three centimeters and connect all the points obtained as shown in the figure.

  • We turned out the basis of a classic sprawling, which gives the complete concept of how to sew a sprinkle on.
  • It should be noted that, depending on the season, the sputum can be made of fine material or thick, with closed or open handles.
  • Pattern of fine sprawls with open handles.

Pattern of sprawers for a newborn in full size: how to sew

Pattern of thick sprinkle with closed handles.

Pattern of sprawers for a newborn in full size: how to sew

Of course, depending on the forms of the kid, these patterns should be adjusted in one direction or another. Do not forget to the pattern with a string of material to add points to the seams that are equal to five millimeters. In general, one part of the front and two rear will be needed for the dispensers. They are stitched by the involving sides inside the side and shoulder seams, after which the edges can be spent.

Pants.

The following in line for sewing will be pants that need to be sewed taking into account diapers or without them. From this, the allowance for free-fitting in the hips of the baby.

It is recommended to use the tricks and sew from two halves and sets to the sliders. For non-elastic fabrics, it is mandatory in the sliders, a lastician is sewn, which will not give rise to the sliders between the legs.

Pattern for pants.

Previously, it is necessary to remove the following measurements: the length of the product, semi-coupling the waist of the baby and semi-coupling the thighs. In addition, on the waist add four centimeters to fishery freedom, and eight in the hips.

The construction of the pattern begins with the top of T, from which the length of the product will be postponed, as well as the seating depth, which is equal to the segment of TCH. From two new vertices should be postponed on the right side of two parallel lines: Shsh1 and TT1.

For the front of the pants, it follows from the top of the sh1 to the right side to postpone two centimeters.

Next, additional points are needed, for the smooth contour. From the top sh1, you should postpone two and a half centimeters and a half centimeter in the direction of the corner bisector. As a result, we obtain additional points sh3 and sh4, which with the top of the C2 should be connected using a smooth line.

Now, one centimeter should be postponed from the top of the T1 - we obtain the point T2, which must be connected to the top of T.

From the top of the n in the right side should be postponed the width of the lower part of the pants minus two centimeters. We obtain the vertex H1, which should be connected to the vertex sh2 straight line. Continuing the resulting segment for half a centimeter, we obtain the vertex H2, which should be connected to the vertex N.

Pattern of sprawers for a newborn in full size: how to sew

  1. Go to the back of the toddler pants.
  2. We begin from the top of the SH2, from which the fifth part of the half-coupling of the hips should be postponed on the fifth of the semi-coupling of the hips.
  3. We get the point sh5, from which the down to measure half a centimeter for the top of the C6, which should be combined smoothly with sh2.

From the top of T1 on the left side, two centimeters should be postponed to get the top of T3. Connecting the straight line of the point T3 and C3, on the continuation, lay one centimeter for the vertex T4.

From the top T1 again to the left side, continuing the horizontal segment, lay one centimeter for the T5 vertex, which should then be connected to the vertex T4.

From the top of H on the left side, also by continuing the segment along the horizon, lay one centimeter to obtain the vertex H3, connecting it with the top of T5.

It should be noted that for pants with a titer, about five centimeters should be added to their length on the pattern. For the jumping style pants additionally carry out some item, which is shown in the figure.

Pattern of sprawers for a newborn in full size: how to sew

  • The quantity of the DS segment is within the limits of the half of the half-ups of the waist to two thirds of this value.
  • The magnitude of the segment AB will be equal to half the half-coupling of the waist.
  • The value of the EF segment is within the limits of half a half to two thirds of the distance from the waist to the shoulder of the baby.
  • The length of the strapless can be obtained experimentally.
  • We offer you the finished pattern for knitted tanks with minimal fit.

Pattern of sprawers for a newborn in full size: how to sew

To use this pattern, you should add an allowance for seams of 0.5-0.7 centimeters on all seams, except for belt and bottom (3 cm).

The same allowances should be made for the pattern of the slider, which is given below.

Pattern of sprawers for a newborn in full size: how to sew

Sew the slider is simple enough. Starting work follows from the sewing of the lastician one side to the front of the slider. Next, it follows, using step-down seams, to sew both the second side of the lastician. Then the side seams and the sewing of the soles of the slider are carried out. All edges of the product are recommended to be treated with overlock.

It remains to turn the top edge of the sliders for a gum for half a centimeter and on one and a half, after which it is superimposed on the edge of the machine line. We insert the gum and the sliders can be asked to the baby.

A source: http://dekormyhome.ru/rukodelie/kak-schit-polzynki-i-raspashonky-dlia-novorojdennyh-vykroika-s-opisaniem-po-poshivy.html

How to sew a sprinkle for a newborn: choice of fabric, tailoring technology

Pattern of sprawers for a newborn in full size: how to sew

  • December 1, 2018
  • Needlework
  • Fedorova Victoria

One of the most convenient and practical things for the newborn is pamping. In such clothes, the child's skin is not annoyed, breathing freely, and the movements are not shaken. Such an element of the wardrobe is very easy to wear and just wash. Some moms decide to make such clothes independently and wondered: "How to sew a sprinkle?".

What is this wardrobe element

Spaschonka is one of the types of clothes for the baby. It is put on with the first days of the birth of a child. Externally, this element of the wardrobe looks like a short jacket, which is worn under the sliders.

Pattern of sprawers for a newborn in full size: how to sew

Advantages of dispensers for newborns in front of other types of clothing:

  • comfort;
  • functionality;
  • practicality.

Young parents should be remembered that such an element of the wardrobe is very easy to wear. Just turn the baby on the side.

Many experts recommend using sprawers instead of swelping. Such clothes do not shine movements and does not slow down the development of the child.

Types of dispensers

To the attention of a modern parent is a huge selection of various types of this element of the wardrobe. Therefore, before you sew a sprawling, my mother should familiarize himself with the most popular models:

  • Dispensers are on buttons, strings and buttons. The best option is the fastener located on the side. In the first days of the life of the baby, some parents prefer dispensers on strings. And after a few weeks, it is starting to use models on buttons and buttons.
  • Spasches with seams inside or out. In the first version it is clothing that is stitched by the standard way. In the second - all the seams of the product are on the front part. In the first months of life, the baby should be sprinkled with the seams outside.
  • Spasching with the smell ahead. This element of the wardrobe is recommended to wear a child from 0 to 6 months. After he starts to sit confidently, you can go to the sprawers with the smell of the back.
  • Spasching with short and long sleeves. The first option is ideal for the summer period. But for winter it is better to purchase a long sleeve product. So, in some models there is no hole for the handles, so they are well preserved heat.
  • Body is a popular wardrobe element for newborns. It is 2 connected elements: sprawling and panties. Below are the buttons or buttons. The clasp is used for a comfortable change of diapers. Body is very convenient to wear, it does not bounce and crashes.

Pattern of sprawers for a newborn in full size: how to sew

Each of these species is constantly used by young mothers. The main thing is to correctly determine the required amount of such an element of the wardrobe.

How many springs need a child?

Before purchasing material for sewing, your mother needs to determine how many sprawers will need her baby. Some moments should be taken into account:

  • What time of the year the baby was born (summer or winter);
  • To what age is planned to use sprawers;
  • How often Mom is ready to wash them.

Experts claim that the optimal amount for a newborn with 56 sizes will be 10 sprawers, and for 62 sizes - no more than 5 pieces.

"Winter" children are encouraged to have 7 warm (from boszya or futtern) and 3 lungs (from cotton fabrics). For the "summer" children, 7 of the light fabrics and 3 of the warm fabric are harvested.

The recommended quantity is calculated if you wash 1 time per week. And if the laundry day is scheduled to be carried out 2-3 times a week, then it is enough to purchase 5-6 sprawers.

Pattern of sprawers for a newborn in full size: how to sew

Before sewing, it is necessary to correctly determine the size of the baby. So for the baby 1-3 months is suitable size 50, 56. These are the optimal dimensions for the newborn. However, after a month, such things can become small. Therefore, many practical parents buy at once size 62.

In the choice of this size there are both the advantages and disadvantages. In such clothes, the baby will not be closely and can be worn longer. But you can encounter a problem when the sputum will fall and deliver discomfort to the child.

Therefore, moms should choose clothing strictly in size or one point more.

How to choose a cloth?

A small child in the first months of life does not work the thermoregulation of the body. Therefore, many parents begin to boil their babies into synthetic things, and then they get a breath and poorly working immunity. Therefore, it is important during this period to give preference to clothing exclusively from natural tissues.

For sewing this type of clothing, manufacturers use cotton matter. Therefore, the sprawling from flannels, sither or bosy is the best option for the newborn. The thin batter is also suitable for sewing such an element of the wardrobe. Thanks to the special technology, it perfectly transfers washing and has high strength.

Pattern of sprawers for a newborn in full size: how to sew

The most dense tissues are flannel and Mahra. However, the first will dry out long enough after washing and can "ride", and the second strongly disturbs and also does not dry too much.

What color choose?

Wanting to sew sprawers for girls, moms buy bright fabrics with an unusual pattern. However, such materials are better to leave for older age. Since they are impregnated with too much dye and can negatively affect the skin of the kids.

Pattern of sprawers for a newborn in full size: how to sew

Therefore, both boys, and for girls, it is recommended to choose the fabric of pastel tones for the dispensers. They are less than dyes, they do not learn when washing and see them when they are time to refresh. And if the tissues pick up certain tones, then you can wear your baby stylish and beautiful.

How to sew a sprinkle?

Things made by your own hands will help the baby always feel the mother's love and good thoughts that she put during sewing. In order to make a sprinkle with your own hands, you need:

  • Cut of a tissue with a size of 50 by 90 cm;
  • Buttons or buttons for the fastener;
  • Threads suitable for color;
  • scissors;
  • Chalk or a piece of soap for applying patterns on the fabric.

In advance, build a pattern. If it is difficult for your mother, then it can buy one factory sputum and just to circle it.

Pattern of sprawers for a newborn in full size: how to sew

Stages of making sprawers for a newborn:

  • Make a pattern. It consists of two rectangles with cutouts for a neck and allowance for "scratches", smell. This is a universal model.
  • Be sure to leave the allowances for seams.
  • Cutting patterns on fabric and cut separate parts.
  • Treat the edge of the sleeves overlocked seam.
  • Stroke the Iron allowed for "scratches".
  • Fold two fragments of sputum and make side and shoulder seams. The best choice will be an overlock seam.
  • Treat the neck and bottom of the sputum so that the fabric does not disengage.

The new element of the wardrobe is ready. It remains only to wrap up and stroke the iron. If your mother is fond of needlework, it can decorate the embroidery embroidery, applique or lace stripe. You can handle the seams using oblique bey. To do this, you will need at least 2 meters of this material.

Requirements for clothes made with your own hands

The sewn element of the wardrobe must meet such requirements as:

  • Natural and eco-friendly material from which the pamper is made;
  • The fabric should not contain a large number of harmful dyes;
  • seams are located outside, so they will not irritate the gentle skin of the baby;
  • Pastel tone tissue;
  • the use of buttons or buttons for the fastener (you can do without them);
  • Croes, not involuntary to wear clothes through the head.

Pattern of sprawers for a newborn in full size: how to sew

After completing all the advice, the mother can sew the perfect clothing option for his baby.

Conclusion

Knowing how to sew a sprawling, mother can move to the manufacture of more complex children's things. This will help save the family budget, as well as improve your skills in the sewing business. Perhaps it will give her a new stage of development, and will also reveal the hidden talents. And each thing made with maternal love will bring a child a lot of warmth and comfort.

A source: https://handskill.ru/438494a-kak-sshit-raspashonku-dlya-novorojdennogo-vyiboro-tkani-tehnologiya-poshiva.

Spasching for newborns with your own hands with patterns

Each mom wants her newborn baby to look flawlessly. Today it is a huge assortment of baby clothes, but quality and their cost does not always correspond to the desired.

Therefore, we present a detailed description of the sewing process with your own hands in a step-by-step selection with patterns of original and warm sprawers for newborns.

Sometimes it is the only option to create comfortable conditions for the baby.

Pattern of sprawers for a newborn in full size: how to sew

We sew a warm sprawset for newborns with your own hands with patterns

  • Not depending on the method of manufacturing clothes for a newborn (crochet, knitting, knitting or sewing from the fabric), you need to consider the composition of the threads.
  • Of course, nothing will replace according to any parameters of cotton flannel or sitherium (with a cotton content of 100%), which are an ideal cloth for tailoring newborns.
  • As a rule, future parents acquire a fabric for diapers in advance, and sprawers can be sewed from the residues.

Conclusion, baby clothes need to sew from soft tissue (sitheria, flannel, batista, paper, madapolam), try to get higher quality fabrics to eliminate the possibility of irritation on the baby's body.

Choose fabrics having a smaller color, as dyes are dangerous for the kid.

Pattern patterns for kids from two months is presented in the photo below:

Pattern of sprawers for a newborn in full size: how to sew

Used measurements:

  • The length of the product is 30 cm;
  • semi-cudding neck - 12 cm;
  • Semi-chest breast - 24 cm.

If smashes are needed smaller or larger, then use the source formulas below:

  • In accordance with the long sprinkle - 30 cm, draw the AVSD rectangle with the vertical lines of hell and sun. Then the lines of AB and CD will be width - 14 cm. This value includes 1/2 part of the semi-coupling of the chest with the addition of two centimeters for free felting (24: 2 + 2 = 14 cm).
  • Cut the neck of the back: from t. In the left of the line AV measuring 4 cm (1/3 of the neck of the neck), then from t. In down the line of the aircraft, measure 1 cm (for all sizes) and connect the two points with a slight concave line.
  • Cut the neck from the front: from t. In down along the line of the aircraft, measure 5 cm (1/3 of the semicircle of the neck + 1 cm).
  • Sleeve Length: From T. And I spend left over the line AB 10-15 cm and mark the point R. Then we measure the length of the hand of the baby and look forward to the value if you want a closed sleeve, then add 4-5 cm. It is better to make a spacious sleeve to not Standing the movement of the newborn.
  • Sleeve width: From T. P We carry a line down parallel to the hell line, until it is 11 cm. From the obtained point 11, swipe the horizontal line to the intersection with the HD line and put the P1 point.
  • Bottom sleeves: From point 11, we measure 1 cm along the line connecting points P and 11. From T. P1, I refer to the left 2 cm along the line connecting points P1 and 11. From the point P1 downstream, we deposit 3 cm (point 3) . We get the bottom of the sleeve by spending a line through the three points obtained.
  • Side seam: from t. D We lead to the left along the line of the CD and lay 2 cm (point 2). Connect this point with a point 3.
  • Long products: We divide the line of the SD on the smooth two parts and mark the point, then from point 2 upwards along the side seam meter 1 cm, then connect two points.

Recent Actions - Determination of the species and depth of smell, as well as what will be the fastener, you can select yourself, as it is not necessary to paint the smell, it is done immediately on the fabric.

We study the pattern of dispensers for newborns 0-2 months

Pattern patterns for newborns from 0 to two months is presented in the photo below:

Pattern of sprawers for a newborn in full size: how to sew

  1. This product is cut out without drinks on the seams, since they all go on the front side.
  2. To sew such a sprinkler: Approximately 26 cm Citz width 150 cm (you can sew four dispensers), for decoration - 40 cm in white color, threads under the color of the product, disappearing marker, scissors, pins, overlog.
  3. The details of the decarkum cut are painted in the photo below:

Pattern of sprawers for a newborn in full size: how to sew

Sequence of work:

  • The original facility is twice and put the part of the pattern on the share thread.
  • We supply the contour on the front side using the disappearing marker.
  • We cut the elements of the product without allowances on the seams, and in the center of the front side, fasten, with the help of a pin, strips of our.
  • We are applied in the center. Then we fold the front elements with the back of the shoulder seams and steal them overweight.
  • With the help of an overlog, we process the lower slice of the sleeve, we process both smells on the back and the total cutting of the neck, the lower cuts of the face and the back. Then we fold the sprinkle on the side seams and stead them and the sutures of the sleeves continuously.
  • At the last stage, turn the product with the steamer. Spaschonka ready!

Pattern of sprawers for a newborn in full size: how to sew

Video on the topic

  • For a more visible presentation of the process of making sputum for a newborn, we offer you to get acquainted with the video master classes for beginners:

A source: https://sdelala-sama.ru/shityo/3814-raspashonka-dlya-novorozhdennyh-svoimi-rukami-s-vykroykami.html

How to sew a sprinkle without pattern

Dispenser for newborns with your own hands

Expected adding in the family? Need Dispensers for newborns In the shortest possible time? In this master class, you will learn how quickly and easily sew sprawers without pattern. So, for this you will need:

  • - sitts;
  • - scissors;
  • - Crochet hook.

- a new sprawling; - threads;

Instead of patterns, we use the finished sprinkle, folded in half. The fabric decomposes on the surface of the table. Fold it twice the width of the sprawling. Cut the detail of the back.

To carve out the details of the transfer, you need to have a new sprinkle to hide inside the protruding parts of the back. Cut parts by cutting them on bending.

It is assumed that the dispensers should be sewed a few pieces, so one operation is performed sequentially for all pampex. Produced out the parts by the number of products.

First on Overlock you need to handle the sleeves. To do this, put all the outdated parts so that they are at hand, for example, on their knees. You need to handle parts one after another without cutting the threads.

When the sleeves are stirred, you need to handle the neck and bottom of parts on the overlock (except for the shoulder and side seams). To do this, cut off the total chain of parts, stroke earlier, one.

Connect the details of the transfer and backs.

Starting on Overlock Shoulder (start to smoke them follows from one sleeve to another without the separation of threads in the neck) and side seams.

On the sewing machine, straight stitching to see the shoulder (string as well as on Overlock: without taking the threads) and side seams. So that you do not hide the working threads, you need a line at the beginning and at the end to fasten the line forward-back.

When all the dispensers are striking, cutting the working threads. Hide the working threads of the ropes with a hook for knitting or needle with a wide ear. Extra thread cut off.

Dispensers for newborns Made with your own hands without pattern, ready!

Additional Information

Simple Pattern of sprawers for newborns

Share - Ermashel.Instock

A source: https://sdelaisam.mirtesen.ru/blog/43854300182/prev

Women always relate to their little children. They indulge them and try to make them something with their own hands. Always want her crumb to wear, it is elegant, brightly, so that the clothes on the baby differ from the one that is sold in stores. Because moms and sew their kids comfortable things.

In particular, the usual sputum with antihafts or without, who stitched by the mother, will be better to sit on the child than shopping clothing. Loving mom will take into account the size, make a dispenser from such a material that will not irritate the skin. Woman's good energy particle will give newborn calmness, even if the crumb will dream of a terrible dream.

How to sew a sprawset for a newborn with your own hands - the choice of fabric

Perhaps choose a fabric for a newborn to sew a sprinkler - this is the most important part of the work. You can not use the synthetics for clothing. It is better than cotton fabric, nothing else is invented by science. For dispensers, such materials are well suited as Len, sitheria, flannel, etc. Moreover, warm types of cotton fabric should be chosen in the cold season, and thin canvas are suitable for summer.

Material for tailoringMaterial for tailoring
Material for tailoring

When you come to the store of fabrics, pay attention primarily on non-labor materials and on the quality of the canvas. If you chose natural cotton, then ask the seller, whether there is a conclusion of experts that matter is suitable for newborns, there are no harmful chemical components there.

Do not chase for cheap, pick safe materials. Cite with a grayish-white tint, as a rule, having small face with the front side, crumbly drawings on a white background, suitable for children best. After all, the paint does not penetrate into the material. The water side of the fabric is not painted. Because the tender skin of the crumb does not contact with paint in clothes with such a canvase.

Sitsery materials with a smooth-colored surface have a color with deep impregnation, and on top of it, manufacturers apply all sorts of patterns, drawings. This fabric is still better not to take.

Sitz for breakingSitz for breaking
Sitz for breaking

IMPORTANT : For one breakout, it is enough to take only about thirty centimeters of the material, a small width. Also, it does not prevent in advance to think about how to smell will smear, buy for the button fasteners, buttons, etc.

How to sew a dispenser for a newborn with your own hands - Building pattern circuit

So, after the mattery is selected, you can proceed to the following procedure. Build a pattern of patterns, but take measurements before that. You will need to know:

  • Product length . Measure the kid from the high point of the shoulder to the ass. Suppose that it turned out 28 centimeters.
  • find out Semi-cuddly shaky The child will be about 12 centimeters.
  • Measure the baby in the chest area and divide the data into two - 24 centimeters, this value is called - Semi-chest breast .
Scheme pattern with baby hat and antihaftsScheme pattern with baby hat and antihafts
Scheme pattern with baby hat and antihafts

After that, you will easily make a scheme-pattern of sputum. For the process, take a sheet of paper and pencil with a ruler.

  1. Start drawing a sprinkle from a rectangle. Vertical postpone twenty-eight centimeters - the length of the product. Horizontal deposit 14 centimeters. This value is calculated as follows: Semi-cuddle breasts are divided into half and add 2 centimeters for free felting.
  2. When the rectangle is ready, make a neckline of the back of the rear of the sprawling. From the point to the left in the upper corner of the rectangle, set aside four centimeters. This magnitude is calculated as follows: the semi-cuddle of the neck is divided into three parts. 12/3 = 4 centimeters. After the top of the rectangle, it is necessary to postpone one centimeter. And draw a smooth line connecting these two points.
  3. Now draw the neckline cutout. Again, postpone five centimeters from the same point. The magnitude is calculated as follows: the semi-cuddle of the neck is divided by three, add one to the obtained zyfra. 12/3 + 1 = 5. Down from the top angle, set aside one centimeter and connect the smooth line of the point.
  4. Now it remains to draw the sleeves. The length of the sleeve is approximately 13-15 centimeters, so as not to guess themselves measure this magnitude and the width of the handle in the widest part of the handle.
  5. Set the length of the sleeve from the intended shoulder on the pattern. Down from the extreme point of the sleeve, set aside half the width of the sleeve plus 3-5 centimeters on the free felting. If there are antihafts, then you still draw them. But for this, add a few more centimeters in length and width so that the baby's handles were not closely.
  6. Bottles of the pushes should expand closer to the shoulder. It is desirable to arrange a smooth line.
  7. The sideways are done like this: at the bottom of the right angle of the rectangle, we put two centimeters and the straight line connect the right point of the top corner of the rectangle and the bottom obtained.
  8. The lower line of the sputum will be smooth. To draw it, you will need to postpone two centimeters up and spend a smooth line of Niza on the side cut.
Dispensers for newbornsDispensers for newborns
Dispensers for newborns

The pattern scheme is almost ready, it remains to decide how the dispenser will be played (behind, and maybe in front). What should be the width of the odor itself and the form. Someone loves rectangular forms, and someone is rounded. Hereby given it and draw it in the scheme.

How to sew a pile for baby with your own hands - step-by-step process

The resulting pattern scheme - is only the fourth part of the product. Therefore, do not confirm when you cover the front part of the sprawling and the back.

  • If the smell is in front, then you will need two parts of the transfer and one part of the back. At first, on the fabric, reveal two details of the transition, only the pattern is posted economically so as not to use a lot of material. And be sure to make the allowances for the seams. For cutting the backing material, fold twice so that there is no seam in the middle of the product. When you transferred all the details of the cut paper on the fabric, now you can cut them. And start the sewing of the sprawers.
  • The front parts of the product and the back will fold to each other. And the seuthes of seams overlock. If not, the typewriters, then make a positive seam manually, and for beauty you can choose bright threads of different colors.
Thin stente sprinkler for babyThin stente sprinkler for baby
Flannel Pickup for Baby
  • Try not to pull a lot of threads when you sewing spraas, do neat, even lines, because they will be in sight. On the machine you can use a zigzag for sewing sprinkle, but the seams made by hand more beautifully and softer.
  • All these seams make on the face so that they do not rub the gentle baby's skin. Maybe not everyone likes, when the seam products have to come to humble - in the first place for kids comfort, not a beauty.
  • But so that it is beautiful, the bottom of the product, the neck, the edges of the smells can be buried with a crochet or flash with a special edge ribbon. Even for beauty, in front make embroidery or glue pictures. It remains to make fasteners and all the disintegration for the baby is ready.
  • As you can see, the pitch can be sewn and manually sew. And special skills, great experience in needlework for this not necessary. The main thing is to try and invest your love in the process. Then such thing will protect the child from adversity.

Examples of ready-made sprawers stitched with their own hands :

Children's sputum warm of two types of materialsChildren's sputum warm of two types of materials
Children's sputum warm of two types of materials
Green flannel sprinkleGreen flannel sprinkle
Green flannel sprinkle
Spacers from SitzSpacers from Sitz
Spacers from Sitz

Video: How to sew a sprinkle?

A source

Tailoring for newborns - a pleasant and creative occupation. Moms are trying to pick up for kids up to a year comfortable capes, sliders, slips and sprawers. Before you begin to sewing, you need to decide on the cloth. Consider the time of year it is necessary to ensure that the child felt comfortable in clothes. Patterns of sprawers for a newborn in full size is better to choose in advance.

Selection of fabrics

Stitched dispensers for newborns with their own hands will help future mothers to save money when collecting a wardrobe for the baby. They, like any other baby clothing, should be as hygroscopic and comfortable as possible so that the child's unstable heat exchange is supported correctly. Preferences must be made by soft tissues of natural origin:

  • flannel;
  • hawk;
  • cotton knitwear;
  • Cite.

The choice is carried out depending on the time of year. Clothes should not rub the skin and leave on the body stains from the dye. Before starting to work with a pattern of a jumpsuit, pour with scratches or without them, you need to test a piece of fabric: to see if it does not shy and sit down after washing.

Pattening patch for a newborn

How to sew a sprinkle for a newborn, simple patterns

To sew a sprinkler on buttons or with a smell, it is necessary to approximately know the child's ratio and size of the child:

Sleeve width (in see) Sleeve Length (in see) Width of the product (in see) Product length (in see) Age kid
9628. 24. up to 3 months
12 832. 28. 3-6 months
15 ten 36. 32. 6-12 months

By patterns, you can sew several shirts of different fabrics.

Short sleeve blouse

By pattern of blouses you can sew a T-shirt for a child of 7-12 months. Only fabric may differ:

  • a short sleeve blouse for infant 2-3 months can be sewed from a terry fabric or sist;
  • For a T-shirt, it is preferable to choose cotton knitwear.

All items need to be a zigzag or narrow elastic line. The backrest and before cutting out the turn, not forgetting to do bend:

  • Sleeves - 1.5-1.8 cm;
  • bottom - 2 cm.

The length of the edging beaks (for the neck) is 25-30 cm, the width is at least 3 cm. The allowance for the upper edge must be hugged on the fastener. Sno-crude covers of the back fasteners and grade fold with the involving side. From the fold, it is necessary to retreat 2.5 cm and strain the fasteners. The back and before you need to put on each other, so that all the seams coincide and strain. Sleeves to sew, the edges of the bottom to wash the double needle.

Pattening patch for a newborn

Spaschonka-Kimono.

The process of sewing sprinkle-kimono takes place in several stages:

  1. It is necessary to measure and cut off the elastic tape, with which the lower edges, cuffs and a neck will be treated. The product is folded in half, the back and front facial sides. Seam one edge need to be searched on the typewriter.
  2. The length of the armor and the elastic ribbon is visually divided into 4 parts. By labels, they can be pierced with decorative needles. Under the cutting line of the armhole, the knitted tape is sewn. You can simultaneously process edges.
  3. The shoulder seam of another sleeves is flashed, connecting the ends of the ribbon. Processing allowances.
  4. Sleeves and cuffs are blocked on 4 parts, split up and flash. The ends of the ribbon are connected, flash the inner seam of the sleeves and smoothly switch to the side (on paragraph 2).
  5. The elastic tape for the processing of the lower edge is divided into 4 parts, passing the edge itself. At the marks, the parts are climbing and flashing (paragraph 2).

The inner seam, which passes into the side, is stitched (paragraph 5). Punches are processed separately.

How to sew other clothing items?

In addition to the sprinkle, you can independently sew an envelope, overalls for a newborn, cape, bib, booties and sliders. The costs of time and money are minimal, with the task you can cope even in the absence of experience. On the patterns of bodies for a newborn, you can sew a long shirt, which will be comfortable to facilitate the body of the child and go to it between the legs.

Classic sliders for baby

Sew the sliders for a newborn can be from flannel. Such a cloth will allow the skin of the child to breathe and will not fade his movement. Seams should pass from the wrong side. The patterns of the slider can be seen in the photo below.

Required tools and materials:

  • sewing machine;
  • sharply sharpened scissors;
  • Threads suitable in color to fabric;
  • Elastic tape or gum - 37 cm;
  • Cotton knitwear or flannel - 0.5 m.

The process takes place in several stages:

  1. Cutting material. To make the belt wider, its in the height of the pattern increases twice (up to 17 cm). With a string for each detail, you need to take a break on the seam (up to 1 cm). To cut parts of the tracks or socks, the pattern is laid out on the fabric folded twice. The back and front of the sliders are cut out on matter folded in half.
  2. Connections of socks and front part. They are sewn on Overlock. If the tailoring is carried out using the machine, then all the edges of the seams need to be processed additionally.
  3. Connections of the main details. The back is sewn to the front. All seams should be from the wrong side.

Each panta sews socks separately. The belt is made of a contrasting, brighter fabric so that the sliders turn out to be elegant. It is additionally inserted into it, especially if the belt turned out to be narrow. If the cloth stretches well, then you can additionally not sew the gum.

Pattening patch for a newborn

Booties from felt

Felt remotely reminds felt. Booties, stitched in this material, are warm and cozy. Required tools and materials:

  • threads;
  • needles;
  • sharp scissors;
  • dense paper or cardboard;
  • lounge elastic;
  • felt.

The sewing algorithm:

  1. The child needs to be measured in advance to draw the pattern on paper. Circle legs (slightly above the heel) allows you to determine the length of the second part. You can estimate the height of the product.
  2. The data is transferred to the paper, cuts out the pattern.
  3. Its parts are transferred to the fabric, drive them out with a pencil and cut out.
  4. The heels outlined the center, connect it from the middle of the second part of the pin.
  5. Flash booty in a circle (seam overgrown).
  6. On the Misk, where 2 parts are connected, from the inside sewing a piece of gum, which will help securely lock the booties on the leg of the child.

If desired, the finished product can be decorated with large rhinestones or appliqué from another, more contrast fabric.

Pattening patch for a newborn

Chapecchik for kid

The cape is a mandatory component of a newborn wardrobe. Lightweight cap protects the spring from the draft and temperature drop. To prevent the shrinkage of the finished product, you need to wash and try the cloth with a hot iron. Before starting to sew, you should find out the size of the child's head depending on the age:

Head circumference Child age (months)
Girls Boys
36.6 37,3 1
38.4 38.4 2
40. 40.9 3
40.5 41. 4
41. 41,2 5
42,2 44,2. 6
43,2 44.8. 7
43.3. 45.4. 8
44. 46.3. 9
45.6 46.6. ten
46. 46.99 eleven
46. 47.2. 12

To speed up the work, you can download and print the pattern of the cape for a newborn in full size. Details are unfolded on the material in the direction of the share thread. All parts of the cap cut out. If a wide lace friction is expected on the oval line, then the side item needs to be narrow

A lace rim is fired to the occipital part, folds can be laid. The finished assembly from the lace should "look" up. Composite parts of the future caps are laying out with the combination of central lines. Fix them with pins. All parts are stitched by the corresponding seam, the process takes place in 2 stages.

The mark starts with the central line. Before the marketer, the ends of the seams are better fixed by pins. The cap is stitched on the typewriter. The front edges are slightly assembled to form folds - it will be better to lay down the product. The zigzag seam is sewn to lace to the front of the hat. It can be pre-occupy.

Decorative folds are sewn through the line. The internal seams are treated with a bike of batter. If you plan to wear a cape for a child every day, then it's better to do the seams. The bottom of the nape is guarded by a line with a big step. The lower edge is treated last. 2 Thin tissue strips of 3-4 cm width are folded and stitching edges. Finished strings are sewn to the bottom of the cap.

Pattening patch for a newborn

Bib sharp

The breastplate will need a child in 3-4 months. It is often sewn from hygroscopic fabric. Several species of slobes are isolated:

  • on velcro;
  • on strings.

It is necessary to take into account the degree of tissue stiffness so that the child in touching the breastnik does not experience discomfort. The fabric from which they sew the whirlwind:

  • knitwear;
  • linen;
  • cotton;
  • Cite.

Tools and materials:

  • finished pattern;
  • sewing machine;
  • scissors;
  • oblique bay or finishing tape - 1.5 m;
  • Soft Tan - 60x30 cm.

The material is twice in order to get a square of 30x30 cm. The top is neatly cut - an in-depth cutout will be a neck. The rest of the parties are neatly cut to form a semicircle. Details of the future bib are trying on a child to cut out more accurate.

At the front of the whirlwind, any liked drawing is contacted. It can be broken through glass or copy paper. Both parts applied to each other with the involving side and cut the neck cutout for the neck. The region must coincide with the edge of the whirlwind. The oblique beyk must be measured so that it is enough for both ties.

It is folded face outside. The top edge of the finishing ribbon is wrapped inside (0.5 cm). After an indentation was made by 2-3 cm, future strings are stitched on both sides. In the continuation of the beaks put a whirl and stitch the edges. The finishing flashes turn inside so that the product does not wear quickly. Invested bay bay flashes on a sewing machine along the entire length.

By similar technology, you can sew a waterproof bib. For this, the oil is placed between the front and rear part.

Pattening patch for a newborn

Rompers

Jumpsuit will protect the child from draft. To sewing a children's slider, you will need:

  • Press and metal buttons;
  • machine;
  • Portnovo chalk either dry soap;
  • scissors;
  • pattern;
  • The main (0.5 m) and finishing material (riban or knitwear).

If it is supposed to tailoring a jumpsuit for a newborn, then the length of the finished product will be 56 cm. To increase it, several centimeters are added to the bottom, stepper and shoulder sections. With the help of the chalk, the pattern is transferred to the cloth, folded twice. The equity thread is located along. When marking, you need to add batches of 1 cm on each side to get a single back, sleeves and shelves.

Panja and sleeves cuff cut out from Riban. Strips are obtained up to 8 cm wide, length - to 17. The width of the collar and planks for the fasteners - 5 cm, length - 31 cm. The material for finishing should be combined with the main cloth. In order for the fasteners for a long time to hold the shape, they are glued with phliselin. The planks bend and pass through it a hot iron.

To the central sections of the bar is applied at a distance of 1 cm. The sections are flashed from the side of the planks. With the front side, the allowance is removed with a wide line. The bar is superimposed on another and flashing on the typewriter. The shelves are folded with the front side inside and stitch. Coop the shoulder slice so that there is a breaking. Side seams and sleeves are flashing at the same time, then stepping downs.

To speed up the work, they can be pre-sexed manually. All shelves are cooled from the side of the shelves. The cuff turns out, put in a straw or sleeve. Seams need to spend and sew collar folded along. With the help of the press, you can set the buttons or sew buttons.

Pattening patch for a newborn

Envelope for a newborn with your own hands

The easiest to sew an envelope blanket. In the process, 2 types of cotton fabric are used, lace (for decoration), syntheps. The latter can be replaced with leaf hollofiber or alpolyux. Squares 100x100 cm squares are cut out of the syntheps and fabrics. They are applied by the front sides to each other and fasten the pins. Together with the syntheps, the material is stitched diagonally. Lace is contaminated to the edges of the square.

The second square is applied by the front side of the synthetic tube and flashes all 4 layers together (material, lace, material, syntheps). Leave a small pocket of 10 cm wide. Through the resulting hole, the blanket is turned and sewing the hole manually. For a boy you can sew an envelope without lace. The finished product is decorated with a holofayber bow, which will resemble a bow tie.

If the child was born in the summer, then a soft envelope-plaid, stitched from velor, plush or cotton take an extract. Squared 100x100 cm should be smoothed the angles with the help of panting or girlfriend (plate, vase with a wide neck). Fabric copper with pins, flash on the machine. Through the left hole (no more than 15 cm), the envelope is turned.

Pattening patch for a newborn

Envelope-changer for a newborn

Changing envelope is a multifunctional product that is considered an alternative to diapers. It is suitable for walking in the fresh air and day sleep. Children from the first days of life up to 6 months. In the envelope of the legs and the hands of the child can move freely, but the baby itself is not capable of scratching itself. In order to replace the diaper, you only need to unbutton zipper.

Material for making a changing envelope - Natural cotton. It is well circulating air. By type of clasp products are divided into 2 types:

Lightning allows you to carefully unbutton the product, not alarming kid. Velcro is easily fixed: there is a cut on the envelope of this type, which simplifies the process of changing the diaper. In winter, newborn children sew insulated heaters. The role of the insulation is performed by natural fur or fleece. In the summer season, it is permissible to use cotton knitwear and fleece.

The width of the cocoon should not exceed 30 cm, length - no more than 80 cm. The easiest to sew an envelope without obscure of 3 layers:

  1. Packed with a suitable size cut in advance.
  2. The main layers of the fabric are combined with each other, the insulation is invested between them.
  3. The workpiece is stitching and combined it in half.
  4. Retreating 20-25 cm on top, sewls locks.
  5. Upstairs form a hood.

Treatment of edges - an important nuance. They need to rejoice well so that the child does not hurt and have not experienced discomfort inside the envelope when driving. From the fold you need to leave 2 cm on the edge. You can decorate the finished product by appliqué, rhinestones or embroidery.

See also:

  • How to put the pantsHow to put the pants

    Wide pants can be independently reduced, fed them in a figure so as to look fashionable and neat. ...

  • How to sew pillowcase on the pillow
  • Fashionable summer 2020.

    It was hot for rest, seas, delicious ice cream and of course chic outfits. In the summer, everyone loves to be ...


Добавить комментарий